IN110plus Memmert Standard Incubators

Control technology

Control Technology:

• Adjustable parameters:
  Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
• Function HeatBALANCE: 
  Adapting the distribution of the heating performance of the upper and lower heating circuit from -50 %to +50 %
• Sterilization:
  Fixed sterilization program (4 hours/160°C) for sterilization of working chamber, not for sterilizing the load
• Function SetpointWAIT:
  The process time does not start until the set temperature is reached
• Calibration:
  Three freely selectable temperature values
• Language setting: 
  German, English, Spanish, French

Safety & Standards

Safety:

• Temperature control: 
  Overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
• Temperature control: 
  Mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
• AutoSAFETY: 
  Additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
  
• Autodiagnostic system:
  For fault analysis
• Alarm:
  Visual and audible.

Additional data

Electrical data

230 Volts

• (+/- 10%)
• 50/60 Hz / approx. 8.7 amps

115 Volts

• (+/- 10%)
• 50/60 Hz / approx. 15.6 amps

Certifications

Interior & Exterior

Stainless Steel Interior

• Volume:
  161 I
• Dimensions W x H x D in mm:
  w_(A) x h_(B) x d_(C): 22" x 18.9" x 15.8"
• Max. loading of chamber: 
  385 lbs

Textured Stainless Steel Casing

• Dimensions: 
  w x h x d : 29.3" x 34" x 23"

Stainless Steel

For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).

Accessories