Memmert Compressor Cooled Incubators

Control technology

Control Technology:

• ControlCOCKPIT: 
  TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
  
• Language setting: 
  German, English, Spanish, French, Polish, Czech, Hungarian
• Timer:
  Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function SetpointWAIT:
  The process time does not start until the set temperature is reached
• Calibration:
  Three freely selectable temperature values
• Adjustable parameters:
  Temperature (Celsius or Fahrenheit), fan speed, programme time, time zones, summertime/wintertime

Safety & Standards

Safety:

• Temperature control: 
  Adjustable electronic overtemperature monitor and mechanical temperature limiter
• Temperature control: 
  Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
• AutoSAFETY: 
  Additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
  
• Autodiagnostic system:
  For fault analysis
• Alarm:
  Visual and acoustic.

Additional data

Electrical data

115 Volts

• (+/- 10%)
• 50/60 Hz / approx. 10.4 amps

230 Volts

• (+/- 10%)
• 50/60 Hz / approx. 5.0 amps

Certifications

Interior & Exterior

Stainless Steel Interior

• Volume:
  449 I
• Dimensions W x H x D in mm:
  w_(A) x h_(B) x d_(C): 1040 x 720 x 600 mm
• Max. loading of chamber: 
  200 kg
• Max. loading per internal: 
  30 kg

Textured Stainless Steel Casing

• Dimensions: 
  w x h x d : 1224 x 1467 x 784 mm
• Installation: 
  On lockable castors
• Housing: 
  Rear zinc-plated steel

Stainless Steel

For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).

Accessories

 

Model sizes	110	110 eco	260	260 eco	450	450 eco	750	750 eco
Stainless steel grids, electropolished	E20165	E20165	E28891	E28891	E20182	E20182	E20182	E20182
Reinforced stainless steel grid, electropolished, max. loading 60 kg; from size 450 with guide bars and fixing screws (only in connection with option K1). Please consider max. loading of chamber	E29767	E29767	E29766	E29766	B32190	B32190	B32190	B32190
Perforated stainless steel shelf	B00325	B00325	B29725	B29725	B00328	B00328	B00328	B00328
Reinforced perforated stainless steel shelves, max. loading 60 kg, with guide bars and fixing screws and only in connection with option K1. Please consider max. loading of chamber	-	-	-	-	B32191	B32191	B32191	B32191
Stainless steel slide-in drip tray, 15 mm rim (may affect the temperature distribution) - cannot be used in connection with option K1	E02073	E02073	E29726	E29726	E02075	E02075	E02075	E02075
Stainless steel slide-in drip tray, 15 mm rim, with guide bars and fixing screws (may affect the temperature distribution) - can be used only in connection with option K1	-	-	-	-	-	B32763	B32763	B32763
Max. loading per slide-in drip tray (kg)	3	3	4	4	8	8	8	8
Stainless steel bottom drip tray, 15 mm rim (may affect the temperature distribution) - cannot be used in connection with option K1	B04359	B04359	B29722	B29722	B04362	B04362	B04362	B04362
Stainless steel bottom drip tray, 15 mm rim (may affect the temperature distribution) - can be used only in connection with option K1	-	-	-	-	B34055	B34055	B34055	B34055
Max. loading per bottom drip tray (kg)	3	3	4	4	8	8	8	8
USB-Ethernet adapter	E06192	E06192	E06192	E06192	E06192	E06192	E06192	E06192
Ethernet connection cable 5 m for computer interface	E06189	E06189	E06189	E06189	E06189	E06189	E06189	E06189
USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (User-ID-programme) on Memory-stick, prevents undesired manipulation by unauthorised third parties. When reordering please specify serial number (only for units with TwinDISPLAY)	B33170	B33170	B33170	B33170	B33170	B33170	B33170	B33170
FDA conforming software AtmoCONTROL (FDA edition). Meets the requirements for the use of electronically stored data sets and electronic signatures as laid down in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA). Base licence for the control of one unit. Respective IQ/OQ documents available in German and English language (without surcharge)	FDAQ1	FDAQ1	FDAQ1	FDAQ1	FDAQ1	FDAQ1	FDAQ1	FDAQ1
Integration of one additional unit (up to max. 31 units) into an already existent FDA-software licence (only for units with TwinDISPLAY)	FDAQ2	FDAQ2	FDAQ2	FDAQ2	FDAQ2	FDAQ2	FDAQ2	FDAQ2
DAkkS calibration for one free-selectable temperature value according to method C (DKD-R 5-7)	E39696	E39696	E39696	E39696	E39696	E39696	E39696	E39696
DAkkS calibration for further temperature values according to method C (DKD-R 5-7)	E39697	E39697	E39697	E39697	E39697	E39697	E39697	E39697
IQ/OQ document with works test data for chamber, incl. temperature distribution survey for one free-selectable temperature value. 9 measuring points (size 30), 27 measuring points (sizes 55 - 1060) to DIN 12880:2007-05 (further temperature values on demand), PQ check list as support for validation by customer	D00127	D00127	D00127	D00127	D00127	D00127	D00127	D00127
On-site IQ/OQ for a freely selectable temperature value, including temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 (excluding travel costs, not subject to discount, GER, AT, FR only)	DLQ100	DLQ100	DLQ100	DLQ100	DLQ100	DLQ100	DLQ100	DLQ100
Extension of DLQ100 by an additional freely selectable temperature value (not subject to discount)	DLQ100A	DLQ100A	DLQ100A	DLQ100A	DLQ100A	DLQ100A	DLQ100A	DLQ100A
Individual on-site Performance Qualification (PQ)	DLQ200	DLQ200	DLQ200	DLQ200	DLQ200	DLQ200	DLQ200	DLQ200
Maintenance ICP/ ICPeco - carrying out and documentation according to Memmert maintenance plan (excluding travel costs, not subject to discount, GER, AT, FR only)	S00315	S00315	S00315	S00315	S00315	S00315	S00315	S00315
Maintenance contract ICP/ ICPeco - carrying out and documentation according to Memmert maintenance plan, minimum duration 3 years (excluding travel costs, not subject to discount, GER, AT, FR only)	S00315J	S00315J	S00315J	S00315J	S00315J	S00315J	S00315J	S00315J
Calibration of one freely selectable temperature value (excluding travel costs, not subject to discount, GER, AT, FR only)	S00205	S00205	S00205	S00205	S00205	S00205	S00205	S00205
Calibration of an additional temperature value (not subject to discount)	S00215	S00215	S00215	S00215	S00215	S00215	S00215	S00215