HCP50 Memmert Humidity Chamber

Control technology

Control Technology:

• ControlCOCKPIT:
  TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
• Language Setting:
  German, English, Spanish, French, Polish, Czech, Hungarian
  
• Adjustable Parameter: 
  Temperature (Celsius or Fahrenheit), relative humidity, program time, time zones, daylight savings time
• Timer: 
  Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function SetpointWAIT: 
  The process time does not start until the set temperature is reached
• Calibration: 
  Three freely selectable temperature values

Safety & Standards

Safety:

• Temperature control:
  mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
• Temperature control:
  over- and under temperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, adjustable at the controller
  
• AutoSAFETY: 
  additionally integrated over- and under temperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or under temperature, heating is switched off in case of overtemperature, the compressor in case of under temperature
• Autodiagnostic system: 
  integral fault diagnostics for temperature and humidity control
• Alarm:
  with visual and acoustic alarm in case of over-/under temperature and under humidity, open door and empty water tank

Additional data

Electrical data

230 Volts

• 50/60 Hz
• approx. 6.6 A

115 Volts

• 50/60 Hz
• approx. 13.2 A

Certifications

Interior & Exterior

Stainless Steel Interior

• Volume:
  56 l
• Dimensions W x H x D in mm
  w_(A) x h_(B) x d_(C): 15.7" x 16.7" x 13"
  
• Max. number of internals: 
  5
• Max. loading of chamber: 
  165 lbs
• Max. loading per internal: 
  33 lbs
• Interior: 
  Material 1.4301 (ASMTM 304), corrosion resistant

Textured Stainless Steel Casing

• Dimensions: 
  w x h x d : 22” x 31.3” x 20.5”

Stainless Steel

For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).

Accessories

 

Model sizes	50	105	150	240
Perforated stainless steel shelf	E35160	E37418	E37418	E35158
Stainless steel grid, electropolished	E20164	E20165	E20165	E43118
Central water supply with filter cartridges for connection to the domestic water supply. Product information on demand.	ZWVR6	ZWVR6	ZWVR6	ZWVR6
Central water supply without filter cartridges for connection to the domestic water supply (only for demineralised water with a conductivity of 5 to 10 μS/cm and a pH value between 5 and 7). Product information on demand	ZWVR7	ZWVR7	ZWVR7	ZWVR7
Guarantee extension by 1 year	GA3Q5	GA3Q5	GA3Q5	GA3Q5
USB-Ethernet adapter	E06192	E06192	E06192	E06192
Ethernet connection cable 5 m for computer interface	E06189	E06189	E06189	E06189
USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (User-ID-programme) on Memory-stick, prevents undesired manipulation by unauthorised third parties. When reordering please specify serial number (only for units with TwinDISPLAY)	B33170	B33170	B33170	B33170
Stacking set (4 pcs) for stacking of appliances of same size	B29744	B29744	-	-
Stacking set (4 pcs) for stacking of appliances of same size	-	-	B42114	-
Stacking set (consisting of stacking corners, one connecting plate for the rear, two wall brackets) for stacking of two units of same size (size 240 only in combination with subframe B33509 or B43598)	-	-	-	B48129
Subframe (622 mm high) adjustable in height (sizes 150/240: should not be used for 2 stacked units)	B33504	B33505	B33505	B33506
Subframe (130 mm high); sizes 150/240: only in combination with the corresponding stacking sets for stacked appliances.	B33507	B33508	B33508	B33509
Subframe, on castors (height 120 mm; stainless steel, material 1.4301)	-	-	-	B43598
FDA conforming software AtmoCONTROL (FDA edition). Meets the requirements for the use of electronically stored data sets and electronic signatures as laid down in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA). Base licence for the control of one unit. Respective IQ/OQ documents available in German and English language (without surcharge)	FDAQ1	FDAQ1	FDAQ1	FDAQ1
Integration of one additional unit (up to max. 31 units) into an already existent FDA-software licence (only for units with TwinDISPLAY)	FDAQ2	FDAQ2	FDAQ2	FDAQ2
External measuring instrument with sensors with additional measuring head for temperature and humidity measurement. Product information on demand (models HPP, ICH, ICH L, ICH C, IPPplus and ICOmed)	B04714	B04714	B04714	B04714
DAkkS calibration for one (freely selectable) temperature and humidity value according to method C (DKD-R 5-7)	E48847	E48847	E48847	E48847
DAkkS calibration for further temperature and humidity values according to method C (DKD-R 5-7)	E48848	E48848	E48848	E48848
IQ document with device-specific works test data, OQ/PQ check list as support for validation by customer	D00124	D00124	D00124	D00124
IQ/OQ document with device-specific works test data for one free-selectable temperature and humidity value, incl. temperature distribution survey at Memmert for 27 measuring points (26 measuring points on model HPP1400) to DIN 12880:2007-05, PQ check list as support for validation by customer (models HPP and ICH).	D00136	D00136	D00136	D00136
On-site IQ/OQ for a freely selectable temperature and humidity value, including temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 (excluding travel costs, not subject to discount, GER, AT, FR only)	DLQ101	DLQ101	DLQ101	DLQ101
Extension of DLQ101 by an additional freely selectable temperature and humidity value (not subject to discount)	DLQ101A	DLQ101A	DLQ101A	DLQ101A
Individual on-site Performance Qualification (PQ)	DLQ200	DLQ200	DLQ200	DLQ200
Maintenance HCP - carrying out and documentation according to Memmert maintenance plan (excluding travel costs, not subject to discount, GER, AT, FR only)	S00313	S00313	S00313	S00313
Maintenance contract HCP - carrying out and documentation according to Memmert maintenance plan, minimum duration 3 years (excluding travel costs, not subject to discount, GER, AT, FR only)	S00313J	S00313J	S00313J	S00313J
Calibration of one freely selectable temperature value (excluding travel costs, not subject to discount, GER, AT, FR only)	S00205	S00205	S00205	S00205
Calibration of an additional temperature value (not subject to discount)	S00215	S00215	S00215	S00215
Calibration of one freely selectable temperature and humidity value (excluding travel costs, not subject to discount, GER, AT, FR only)	S00207	S00207	S00207	S00207
Calibration of an additional temperature and humidity value (not subject to discount)	S00216	S00216	S00216	S00216